Micos air compressor oil is the screw air compressor oil  series with viscosity of VG 32 , good thermal stability  that will meet all types of air compressors working in the most hash temperature conditions, produced by GS Caltex Corp Korea, one of the world's largest industrial oil producers.

Micos compressor oil used for Yujin-Micos air compressors. With a very modern technology that has been tropicalized completely to suit the climate in Vietnam, using high-quality based oil Micos is an ash-free oil with special operation features for the Air compressors, designed to meet the most demanding requirements of leading air compressor manufacturers.The product formulation is based on high-quality mineral oil and a high-performance additive system that protects the compressor and make the reliability for operation from the pleasant  to hard conditions.

- Outstanding advantages of  Micos oil compressor oil.

+ Using Micos oil compressor oil will make the compressors cleaner and less sediment than other  mineral oils, which helps extend the operation time between maintenance periods.
+ Excellent anti-oxidation and thermal stability ability to extend the use time, while controlling the formation of sediment. These products also have excellent resistance to abrasion and corrosion, which enhances the service life and performance of machines.
+ Enhancing the operation of the machine  less ash and carbon.
+ Reduce sediment in discharge lines.
+ Reducing explosion ability in discharge system.
+ Enhancing the performance of the compressor.
+ Higher longevity of  lubricant oil, great thermal stability and oxidation stability.
+ Improve filter life.
+ Lower maintenance costs.
+ Reducing  erosion of silver rings, cylinders, bearings and gears, high loading capacity.
+ Less sedimentation on the below device, excellent water separation ability.
+ Reducing  formation of sendiment  in crankshaft and discharge  lines.
+ Reducing  clogged devices  due to agglomeration.
+ Less likely to form emulsions.
+ Enhances the ability to protect valves and reduce erosion  of belts and cylinders.
+ Effective prevention of  rust and corrosion.

- Applications of  Micos compressor oil Micos compressor oil is recommended for single and multi-level air compressors. They are especially effective for compressors that operate continuously at high temperatures. The maximum compressed air temperature, according to DIN 51506, is 220 ° C. They are suitable for screw machines and rotary compressors with lower viscosity, mainly used in rotary compressors. Micos is recommended for compressors with a history of excessive oil degradation, poor valve performance or forming oil glue. They are compatible with all metals used in the manufacture of compressors and with fabrication materials and oil seals. Micos compressor oil is not  used in air compressors for breathing applications. The following types of compressors have shown the excellent performance with Micos oils

+ Piston  air compressor
+ Screw compressor
+ Propeller compressor
+ Valve and centrifugal compressor
+ Air compressor system with main gear and bearings
+ Fixed and mobile compressors
* Note: At present, Minh Phu company provides oil of  air compressor  for Micos air compressor with high quality, and competitive price. Please contact us : 0919 23 28 26 for more information. Best regards

HOW TO REPLACE AIR COMPRESSOR OIL In the using process of  air compressors, users often have to periodically change the oil, the oil change recommended by the manufacturer is very important, it helps the machine to be more durable, reducing many incidents , contributing to stability of the manufacturing process in  the factory. However, it is very important to replace the compressor oil correctly, because failure to observe it that may cause you burnt.

Carefully read this article will help replace properly screw air compressor .

1. Press the STOP button
2. Disconnect the power
3.Be sure that the pressure in the air compressor drops to the level of ambient pressure (check if the pressure gauge indecates 0 Mpa).
4. Remove the door of the oil case.
5. Remove the discharge oil joining on the oil case.
6. Place the oil pan under the oil discharge valve. Open oil draining valve. Let the oil comes out and close and plud oil draining.
7. Place the oil pan under the oil cooler. Remove oil cooler. Replace the oil cooler.
8. Open and replenish oil into the oil case  between 2 red lines.
9. Be sure that the removed devices are reinstalled and tightened, and reinstall the door, the right panel is in the same position.
 10. Reconnect the power. Press START and stop it after 7 or 8 seconds later.
11. Check the oil level on the oil level gauge. The oil level will be lower because there is a bit of circulation in the pipe and in the oil cooler.
12. Confirm that the pressure drops to the ambient air pressure level. Then disconnect the power supply and replenish lubricating oil to the additional oil door.
13. After oil replenishment, cover carefully and firmly. Press the START button again to check the oil level when the compressor is fully loaded.

Note :
- If the oil runs out of viscosity,  a lot of sediments or color change, you cannot recover the system's functions despite cleaning the oil cooler, oil case and oil pipe. You may have to replace the oil cooler and overhaul the entire system (including airend).

Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.