Air compressor oil uses
- Tuesday - 18/12/2018 23:23
- Close page
The movement of screw is pineaple-sharpened, therefore it's nescessary to use lubricating oil with theaim to reduce the corrosion and softly operate. The bearing is completely stay in air end so it is also lubricated with air compressor oil.
Air compressor oil :
-The movement of screw is pineaple-sharpened, therefore it's nescessary to use lubricating oil with theaim to reduce the corrosion and softly operate. The bearing is completely stay in air end so it is also lubricated with air compressor oil.
-Another use is to fill the gap off screw supporting the compresing of screw.
-Also oil is solvient cooling the screw, this temperature was born due to the compression operation of screw pair.
The air itself changes the pressure from air pressure to the machine working pressure (usually from 7kg / cm) also creates temperature.
The main use to macine and motor.
1. Friction reduce: Oil film prevents metal surfaces from direct contact with each other, preventing abrasion on metal and alloy surfaces, reducing mechanical losses
2. Cooling : Lubricants disperse heat generated by friction and the fuel combustion process up to 350 ° C in the piston area.
3.Cleaning: During the operation of the engine, it will be contaminated with gas, dirt. Lubricating oil will remove dirt from the engine, clean the anti-scale on the surface.
4.Acid neutralization: During operation the engine will produce CO2 (portable air compressor using pulse detonation engine) reacted to produce acid. Lubricants contains alkaline contributing of neutralizing acids, protecting motor from corosion.
5.Sealing: Among the engine parts, the air end has gaps, the lubricant is the liquid that will go through the details of the engine and the air end , which is tightly closed between the piston and the cylinder, keeping the pressure the rate in the combustion chamber and minimizing the combustion gases that fall into the crankcase.
6.Hydraulics: Lubricants in the form of hydraulic liquid has function to support the engine, to increase engine performance, so the engine will much better operation.
Other : How to replenish air compressor oil .
-The movement of screw is pineaple-sharpened, therefore it's nescessary to use lubricating oil with theaim to reduce the corrosion and softly operate. The bearing is completely stay in air end so it is also lubricated with air compressor oil.
-Another use is to fill the gap off screw supporting the compresing of screw.
-Also oil is solvient cooling the screw, this temperature was born due to the compression operation of screw pair.
The air itself changes the pressure from air pressure to the machine working pressure (usually from 7kg / cm) also creates temperature.
The main use to macine and motor.
1. Friction reduce: Oil film prevents metal surfaces from direct contact with each other, preventing abrasion on metal and alloy surfaces, reducing mechanical losses
2. Cooling : Lubricants disperse heat generated by friction and the fuel combustion process up to 350 ° C in the piston area.
3.Cleaning: During the operation of the engine, it will be contaminated with gas, dirt. Lubricating oil will remove dirt from the engine, clean the anti-scale on the surface.
4.Acid neutralization: During operation the engine will produce CO2 (portable air compressor using pulse detonation engine) reacted to produce acid. Lubricants contains alkaline contributing of neutralizing acids, protecting motor from corosion.
5.Sealing: Among the engine parts, the air end has gaps, the lubricant is the liquid that will go through the details of the engine and the air end , which is tightly closed between the piston and the cylinder, keeping the pressure the rate in the combustion chamber and minimizing the combustion gases that fall into the crankcase.
6.Hydraulics: Lubricants in the form of hydraulic liquid has function to support the engine, to increase engine performance, so the engine will much better operation.
Other : How to replenish air compressor oil .