Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.
Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations.
Inspection intervals and inspection items depend on the installation site as well as operating conditions. The table below provides the rough guidlines. Sound operation is expected if the guidelines are followed.
Micos air compressor oil is the screw air compressor oil series with viscosity of VG 32 , good thermal stability that will meet all types of air compressors working in the most harsh temperature conditions, produced by GS Caltex Corp Korea, one of the world's largest industrial oil producers.
Safely using of compressed air tank is a very important issue, compressed air tank before being used must be tested by KTAT, registered for use following regulations. Users must hand over the managing responsibility the compressed air tank to the equipment manager in writing. Operating of thetanks is only given to people from 18 years old or older, who are physically fit and well-trained. They must be assigned by the employer in writing.
