Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.
The air reclever tank is an important device in the compressed air system with these following function of: Accumulating gas, stabilizing pressure, Increase idling time, condensating water in the output etc..
Swan air compressors TS series are designed to be compact and dedicated, highly durable, imported air end from Europe, fully-sealed motors, modularized air inlet system,user-friendly equipment panel easy to use.
The movement of screw is pineaple-sharpened, therefore it's nescessary to use lubricating oil with theaim to reduce the corrosion and softly operate. The bearing is completely stay in air end so it is also lubricated with air compressor oil.
Variable Frequency Driver (VFD) -reducing energy consumpsion system is produced with the required amount of air and compressor shutdown under no-load conditions. In order to minimize unnecessary energy loss through the inverter to adjust the number spin of compressor Energy consumption saving arises starting by reducing the starting current as the inverter is operated.