The maintenance compressed air systems are often specified in the system documentation, provided by the manufacturer. In this artical we would like to introduce some rules and maintenance regimes according to general regulation.
Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations.
Inspection intervals and inspection items depend on the installation site as well as operating conditions. The table below provides the rough guidlines. Sound operation is expected if the guidelines are followed.
The air reclever tank is an important device in the compressed air system with these following function of: Accumulating gas, stabilizing pressure, Increase idling time, condensating water in the output etc..
Shell Corena S3 R is high quality compressor oil, designed to provide high lubrication of screw type and vane air compressors. This oil is used for advanced additive system that provides superior protection for compressors operating up to 20 bar and 100ºC discharge temperature with up to 6000 hours maintenance cycle .
