Screw air compressors are in the important position in the industrial process, therefore all aggregates break and troubleshooting affect to industrial process in general and have not expected results. Screw air compressors quality and advantages are undeniable, but every mechanism is run-out eventually, some parts do not operate stably, some are out of operation.
Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations.
Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.
Minh Phu machines and technical sevices Company Address: No.24,102/72 Alley, Truong Chinh Street, Phuong Mai Ward, Hanoi
Office: No.20, 269/1 alley, Giáp Bat street, Ha Noi
Hotline: +84 24 6294 8282 - +8491 923 2826
Mã số thuế: 0106411578 (Đăng ký lần đầu: ngày 02/01/2014, thay đổi ngày 23/10/2017)